Fire Sprinkler Inspection & Testing in Ohio
Wet, dry, pre-action, and deluge sprinkler systems inspected and tested to NFPA 25 standards, with a documented report after every visit.
What's included
- Control valves, gauges, and water flow alarms
- Sprinkler heads for corrosion, damage, or obstruction
- Main drain and inspector's test flow
- Fire department connections (FDCs)
- Backflow preventers tied into the sprinkler system
- Antifreeze loops and dry-pipe air pressure (where applicable)
How a fire sprinkler system actually works
Understanding the system helps explain why regular inspection matters so much -- every part below has to work for the whole thing to work.
Hover or tap any point on the system
Water supply, riser, alarm valve, cross main, branch lines, sprinkler heads -- see what each part actually does, or run the simulation to watch a single head respond to heat.
A common myth: the whole system doesn't go off at once. See why.
Why it matters
Sprinkler systems are the single most effective tool for controlling a fire before it spreads -- but a system with a closed valve, a corroded head, or low air pressure on a dry system can fail exactly when it's needed most. Most Ohio jurisdictions require documented sprinkler inspections on a set schedule as a condition of your occupancy permit and fire code compliance.
How often
NFPA 25 sets a mix of weekly, monthly, quarterly, and annual checks depending on the component -- we track your schedule so you don't have to.
Fire Sprinkler Monthly Self-Check
A printable monthly checklist for the visual checks you can safely run yourself between professional inspections.
Common questions
Get a quote for fire sprinkler
Tell us about your property and we'll follow up to schedule your inspection.